TP-Link TD-W8970N manual To add a virtual server entry

TD-W8970NWireless N ADSL2+ Modem Router User Guide

• WAN Interface: The WAN Service Interface providing the service application.

¾Add: Click the Add button to add a new entry.

¾Remove: Select the check box in the table (shown in Figure 4-25)and then click the Remove button, then the corresponding entry will be deleted in the table.

To add a virtual server entry:

1.Click the Add button on the preceding screen Figure 4-25,and then you will see the new Virtual Server in the next screen as shown in Figure 4-26.

Figure 4-26

2.Select the Interface which you want to use from the drop-down list.

3.Select the service which you want to use from the drop-down list. If the list does not have the service you need, type the name of the custom service in the text box.

4.Type the IP Address of the computer in the Server IP Address text box.

5.Enter the External Port Start, External Port End, Internal Port Start and Internal Port End in the table, and then select the protocol used for this Virtual Server, TCP, UDP or All.

36