TP-Link manual TD-W8970N Wireless N ADSL2+ Modem Router User Guide

TD-W8970NWireless N ADSL2+ Modem Router User Guide

higher priority, such as voice data packets give higher priority than Web data packets. This option will provide better service of selected network traffic over various technologies.

Figure 4-42

Select the Enable QoS checkbox to enable all QoS for all interfaces.

Select a Default DSCP make from drop-down list to automatically mark incoming traffic without reference to a particular classifier.

Click Save/Apply to save the current configuration.

)Note:

The default DSCP mark is used to mark all egress packets that do not match any classification rules.

4.4.8.1 Queue Config

Choose “Advanced Setup”Æ“Quality of Service”Æ“Queue Config”, you can set up virtual servers on the screen below.

Figure 4-43

Click the Add button in Figure 4-43,and you can configure the QoS queue entry on the next screen as shown in Figure 4-44.

47