TD-W8970N Wireless N ADSL2+ Modem Router User Guide
4.5.5 Advanced
Choose “Wireless”Æ”Advanced”, you will see the screen of
Figure
¾Channel: Select the channel you want to use from the
¾Mode: In the
¾Bandwidth: Select the Bandwidth you want to use from the
¾Control Sideband: If bigger bandwidth is selected, this option will allow you select the Control Sideband you want.
¾Fragmentation Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain at its default value of 2346.
¾RTS Threshold: Should you encounter inconsistent data flow, only minor reduction of the default value 2347 is recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. In most cases, keep its default value of 2347.
¾DTIM Interval: This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next
84