TP-Link TD-8816 manual Configure the IP address as -4shows. After that, click OK

TD-8816

ADSL2/2+ Ethernet Router User Guide

Step 4: Configure the IP address as Figure 3-4shows. After that, click OK.

Figure 3-4

)Note:

You can configure the PC to get an IP address manually, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above.

Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd in the field, and then type ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the Router has been established.

Figure 3-5

8