TP-Link TD-8816 manual ADSL2/2+ Ethernet Router User Guide

TD-8816

ADSL2/2+ Ethernet Router User Guide

select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule.

)Note:

If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the “MAC Address” and select the Unmatched rule as “Next”.

Step 4: Finally, click the SAVE to save the entry.

Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address 00-0A-EB-00-07-5F to access the Internet.

)Note:

After you complete the MAC filter rules for the example, the Filter list will show as follows. You can enter the IP / MAC Filter Set Index to view the information about the rule.

Other configurations for the entries as shown in Figure 4-27:

Enter the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.

Enter the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and then click the DELETE button to delete the entry.

4.5.2.3. Application Filter

Select Application Filter as the Filter type (shown in Figure 4-29),then you can configure the filter rules based on application.

37