TP-Link TD-8816 manual Firmware

Page 50

TD-8816

ADSL2/2+ Ethernet Router User Guide

Figure 4-39

4.6.3 Firmware

Choose “Maintenance→Firmware”, you can upgrade the firmware of the Router in the screen (shown in Figure 4-40). Make sure the firmware or romfile you want to use is on the local hard drive of the computer. Click Browse to find the local hard drive and locate the firmware or romfile to be used for upgrade.

Figure 4-40

To upgrade the router's firmware, follow these instructions below:

Step 1: Download a more recent firmware upgrade file from the TP-LINK website (www.tp-link.com).

Step 2: Type the path and file name of the update file into the “New Firmware Location” field. Or click the Browse button to locate the update file.

Step 3: Click the UPGRADE button.

)Note:

1)New firmware versions are posted at www.tp-link.com and can be downloaded for free. If

44

Image 50

Contents TD-8816 ADSL2/2+ Ethernet Router Copyright & Trademarks FCC Statement Package contents Introduction Hardware InstallationQuick Installation Guide ChapterAppendix a Specification TD-8816 Main FeaturesProduct Overview Conventions Front Panel Back PanelInstallation Environment Connecting the RouterADSL2/2+ Ethernet Router User Guide Quick Installation Guide Configure PCADSL2/2+ Ethernet Router User Guide Configure the IP address as -4shows. After that, click OK Is the connection between your PC and the Router correct? LoginIs the TCP/IP configuration for your PC correct? ADSL2/2+ Ethernet Router User Guide ADSL2/2+ Ethernet Router User Guide Click Next to finish the Quick Start Software Configuration StatusInterface Setup Quick StartInternet Dynamic IP Address Static IP Address PPPoA/PPPoEBridge Mode 2 LAN ADSL2/2+ Ethernet Router User Guide ADSL2/2+ Ethernet Router User Guide Routing Advanced SetupFirewall 3 NAT DMZ Virtual ServerOther configurations for the entries as shown in Figure To add a virtual server entryIP Address Mapping To add a mapping rule4 QoS Vlan Assign Vlan Pvid for each Interface Adsl Define Vlan GroupAccess Management 1 ACLFilter IP FilterADSL2/2+ Ethernet Router User Guide To add an IP Address filtering entry ADSL2/2+ Ethernet Router User Guide To add a MAC Address filtering entry ADSL2/2+ Ethernet Router User Guide ADSL2/2+ Ethernet Router User Guide To add a URL filter entry SnmpUPnP Ddns Maintenance CwmpNTP Server automatically AdministrationTime Zone PC’s Clock ManuallyFirmware To back up the Router’s current settings To restore the Router’s settingsSystem Restart DiagnosticHelp ADSL2/2+ Ethernet Router User Guide General Physical and Environment

Related manuals

Manual 73 pages 34.79 Kb

Manual 67 pages 35.92 Kb

Manual 55 pages 18.54 Kb