TP-Link TD-8816 manual Front Panel, Back Panel

TD-8816

ADSL2/2+ Ethernet Router User Guide

Chapter 2. Hardware Installation

2.1The Front Panel

Figure 2-1

The LEDs locates on the front panel, they indicate the device’s working status. For details, please refer to LED Explanation.

LED Explanation:

Indicator	Description	Status	Function Details
		On	LAN port normal
			Connection on LAN port abnormal
LAN	Ethernet	Off
			Data transmitting or receiving on LAN
		Flash
			port
	ADSL	Slow flash	Self-detecting when power up
ADSL		Quick flash	Connecting to the telecom network
	status
		On	Connection to telecom network is OK
		Flash	There is data transmitting or receiving
			on WAN port
ACT	Data
			No data transmitting or receiving on
		Off
			WAN port
Power	Power	On	Power OK
		Off	Power fail

2.2The Back Panel

Figure 2-2

¾On/OFF: The switch for the power.

¾POWER: The Power plug is where you will connect the power adapter.

¾RESET: There are two ways to reset the Router's factory defaults.

Method one: When the device is working, please press the reset button of the Router, keep the reset button pressed down for about fifteen seconds.

Method two：Restore the default setting from “Maintenance-SysRestart” of the Router's Web-based Utility.

3