ZyXEL Communications 3356P-LAN user manual FCC Requirements, Contacting ZyXEL

Page 3

Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. Shielded RS-232 cables are required to be used to ensure compliance with FCC Part 15, and it is the responsibility of the user to provide and use shielded RS-232 cables.

FCC Requirements

This equipment complies with Part 68 of the FCC Rules. On the base unit of this equipment is a label that contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment.

IF REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.

The REN is useful to determine the quantity of the devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the total RENs, you should contact your local telephone company to determine the maximum REN for your calling area.

If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’ t practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the Address and Phone number listed in the warranty card for information on obtaining service or repairs.

The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure the equipment is not malfunctioning.

The user is not authorized to repair or modify the equipment.

This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.

You will find also this information on a sticker on the bottom of the modems case.

The modem is connected to a public switched line using a USOC (Universal Service Order Code) RJ-11C modular jack.

Contacting ZyXEL

If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation in one of the following ways:

Phone: In North America call between 8:00 AM and 5:00 PM PST at (714) 693-0808.

iii

Image 3
Contents Comet 3356P-LAN User’ s Manual Limited Warranty AcknowledgmentsFCC Part 15 Information Contacting ZyXEL FCC Requirements∙ E-mail Table of Contents Status Registers & Result Codes Unpacking Your Modem Hardware OverviewRequired Equipment Introduction Novell Netware Installation HardwareNon-Windows 95 & Windows NT Operating Systems MS LAN Manager Installation Bindings = Lmndisnif Lanabase = Windows for Workgroups 3.11 Installation Packet Driver InstallationChoose Program Manager, Main, Control Panel, Network Windows NT 3.51 InstallationSelect Enhanced mode NDIS3 for.... then press OK Ethernet + Fax/Modem PC Card Installation for NTWindows NT4.0 Installation Select Ethernet + Fax/Modem PC then click OKResource Recommendations Choose My computer, Control Panel, Network, Adapters Choose My computer, Control Panel, NetworkArtisoft Lantastic 6.0 Installation Windows 95 InstallationPage Installation Using the Windows 95 Hyper Terminal Program Understanding AT CommandsDialing and Answering Techniques Dialing using the ATD CommandQuick Tips when issuing AT Commands Making Your First ConnectionAuto-Answer and Hook Controls AT Command Set/Type Example Command DescriptionChanging S Register Values Non-Volatile MemoryModem Result Codes Viewing S Register ValuesDialing Stored Phone Numbers Saving Settings and User ProfilesDefault Modem Settings for PC’ s CommandCommand Use both V.42bis and MNP 5 data compression Basic Modem Operation Basic AT Command Set AT Command Set SummariesSpeaker always on Extended AT& Command Set Extended AT% Command Set Extended AT\ Command SetExtended AT- Command Set AT Command Set Summaries Status Registers & Result Codes Register Dec Function & Description Default Result Code Options Table Extended Result Code Options Table Connect Connect 300 EC NoEC