Peavey Impulse 100P operation manual Amplitude Response 1W 1m On-Axis

The enclosure shall be constructed of injection-molded polypropylene of 1/4" nominal thickness with a UL flame rating, and reinforcing ribs internally. A handgrip shall be molded-in on the top rear edge.

A vinyl coated perforated metal grille shall be provided for woofer protection. The cabinet shall incorporate four tall sturdy rubber feet for floor standing use, and four mounting point inserts, on the top and bottom each, for flying use.

The outside dimensions shall be: 18.88" tall (17.63" rear) by x 14.00" wide (8.25" rear) by x 13.13" deep, and the

weight shall be 35 lbs. Power requirements shall be: 100 Watts Nomimal, 120VAC, 60 Hz Domestic and 240 VAC, 50 Hz (European). The loudspeaker system shall be called a Peavey Impulse® 100P.

Frequency response

		Amplitude Response				(1W 1m On-Axis)
	110
Pa)	100
20	90
(re
dB SPL	80
	70
	60	50	100	200	500	1k	2k	5k	10k	20k
	20
	Figure 1				Frequency (Hz)

12