Peavey Impulse 100P operation manual English

Page 4

ENGLISH

Introduction

Thank you for purchasing the powered version of the Impulse® 100. The 100P features a biamped power section that provides 200 Watts peak dynamic power for the woofer, and 70 Watts peak dynamic power for the compression driver tweeter, both with Peavey’s DDTcompression. Offering a 10" heavy-duty, long- throw woofer and the 14XTcompression driver, the 100P provides line-level balanced inputs with volume control and loop-thru jacks.

Impulse 100P

Bi-amplified powered system with 200 W total power

Both power amps have DDT compression

10" premium heavy-duty, long throw woofer

14XT 1.4" titanium compression driver

Peak SPL in excess of 120 dB with music!

1/4" TRS and M/F XLR line-level balanced inputs

Molded-in horn has exceptionally smooth response and pattern control

Loop Out/In jacks allow link-up of multiple units

Top handgrip

4

Image 4
Contents Page Page Important Safety Instructions English IEC Power Cord Connection ON-OFF SwitchPower LED VolumeLOOP-THRU Jacks USE of the Impulse 100P Flying the Impulse 100PGetting a Signal to the Impulse 100P Getting AC Power to the Impulse 100PUSE of Impulse 100P with a Subwoofer Volume Control Adjustment ApplicationsSee the Rear PANEL/Fuse section for safety instructions TroubleshootingNo Output at All Touch Up Description Amplitude Response 1W 1m On-Axis Electronics and Amplifier Specifications Enclosure Peavey Impulse 100P domesticLoop thru input High-Z Nominal 100 Watts, 120 VAC, 60 HzPeavey Electronics Corporation Limited Warranty 80304912