Lindy PRO-300 user manual Return all connections to their usual states

English Manual

1Disconnect all cables from the REMOTE module and take it to the computer.

2Use a ‘KVM switch-type’ keyboard

cable (6 pin mini-DIN male to 6 pin mini-DIN male plugs with all lines connected) – not supplied. Attach one end of the cable to the keyboard port of the computer. Connect the other end of the cable to the keyboard port of the REMOTE module. This is the only connection required.

3 On the REMOTE module, change switch 1 to the ON position.

4 Attach the power supply unit to the POWER input of the REMOTE module and connect the mains lead to a nearby wall socket.

5Switch on the computer. The upgrade

process will start automatically and confirmation will be given on screen.

6Switch off the computer and disconnect the REMOTE module. Return REMOTE switch 1 to the OFF position.

6.5 Return all connections to their usual states

Once the upgrade process has been completed, perform the following to return the system to its previous state.

1Ensure that switch 1 on both the LOCAL and REMOTE modules is set to the OFF positions.

2Refer to section 3 ‘Connections’ for detailed instructions on correctly connecting the LOCAL and REMOTE modules to the computer, its peripherals, the REMOTE power supply and the twisted-pair cable.

3Remove the diskette from the system and reboot. The upgrade process is now complete.

LINDY KVM Extender C5 PRO-300 Installation and Use page 25