Lindy PRO-300 Extender C5 Accessories, Sound from the microphone cannot be heard or is very quiet

Page 27

English Manual

Sound from the microphone cannot be heard or is very quiet

Check the setting of LOCAL switch 3 – if a microphone is connected at the REMOTE module, the switch should be set to OFF.

Sound input from the stereo line input is distorted and only one channel is working

Check the setting of LOCAL switch 3 – if a stereo line input is connected at the REMOTE module, the switch should be set to ON.

8.Extender C5 Accessories

The following related C5 Series items are available:

LINDY C5 Series Rack mount chassis (Part No. 39388)

This 19” chassis allows multiple C5 Series modules to be neatly arranged within a standard cabinet. Securing plates and screws are supplied separately.

LINDY C5 Series Power distribution module (Part No. 39386)

Provides power for up to four C5 Series modules to reduce mains power socket requirements.

LINDY C5 Series Rack mount securing plates

For Extender C5 PRO-300 Local module (upon request)

C5 Series Skew Compensator (Part No. 39389)

For C5 Series Skew Compensator (Part No. 39369)

C5 Extender Junior (Part No. 39390)

C5 Single Blanking Plate (Part No. 39361)

C5 Quad Blanking Plate (Part No. 39362)

LINDY KVM Extender C5 PRO-300 Installation and Use

page 27

Image 27
Contents KVM Extender C5 PRO-300 Trademarks Safety InformationWarranty information About this manualContents Special Configuration Introduction Supplied items Installation Password override Configuration switch settingsLocal Switch Software can be changed. See . Flash upgrade procedureRemote Switches 2 Remote SwitchRack mount Mounting a module desk or rackGeneral remark Desk mountKVM+A multi-cable connection ConnectionsOptional power connection Serial cable connectionTwisted pair connection Keyboard, video and mouse connections Twisted pair, power and serial connectionsAudio connections Locking and unlocking the system Power and activity indicatorsOperation General UseSpecial configuration To exit from the configuration mode Password settingTo set a password Recognising an IntelliMouse style mouse To override the Remote passwordWhich restore setting do I use? Hot plugging and mouse restorationRecognising an IntelliMouse driver To restore mouse operation when hot pluggingMicrosoft and Logitech specific mouse settings To change mouse signalling protocolsSharpness Video compensation, Image controls sharpness and brightnessTo display a suitable high contrast image To use the image controlsTo use skew adjustment Skew Compensation AdjustmentReport Extender C5 firmware version F 1 Return Miscellaneous settingsFlash upgrade procedure Get the upgrade files from Lindy Technical SupportCreate a startup disk Reconfigure the Local connections and begin Reconfigure the Remote connections and beginCopy the downloaded files to the disk Return all connections to their usual states Troubleshooting No video image is received at the Remote moduleOn-screen mouse pointer does not respond to mouse movements Lindy C5 Series Rack mount chassis Part No Extender C5 AccessoriesLindy C5 Series Power distribution module Part No Sound from the microphone cannot be heard or is very quietEuropean EMC directive 89/336/EEC FCC Compliance Statement United StatesCanadian Department of Communications RFI statement