Lindy PRO-300 user manual Special configuration

Page 16

English Manual

To unlock the system

1Enter the correct password and press <RETURN>. Note: Passwords are NOT case sensitive.

Note: If an invalid password has been entered and the keyboard indicators are not flashing as described above press <RETURN> to clear the incorrect attempt.

2If the correct password is entered, the screen will be restored and normal operation can continue.

To enable the video

Simultaneously press the currently configured hotkeys (by default, <CTRL> and <SHIFT> along with <1>). This command will be required to restore the video if <CTRL> and <SHIFT> along with <L> is used when no password has been set.

To disable the video

Simultaneously, press the currently configured hotkeys (by default, <CTRL> and <SHIFT> along with <0>).

5. Special configuration

5.1 Configuration

You can alter the way that the Extender C5 modules operate to suit your requirements. This is done using the configuration mode and you can affect the following settings:

•Password setting – allows you to lock the remote module to prevent unauthorized system access.

•Mouse restoration and settings – allows you to restore mouse operation and also to change the mouse type.

•Image controls - sharpness & brightness – allows you to manually adjust the video image to ensure that it is crisp and bright.

•Skew adjustment – allows you to manually compensate for possible video errors introduced by long, uneven cable connections.

•Miscellaneous functions

5.2 What are hotkeys?

Hotkeys are two normal keyboard keys that, when pressed simultaneously with a third key, signal to the Extender C5 modules that you are sending a message specifically to them and not to the computer. The hotkeys are ordinarily <CTRL> and <SHIFT>, while the third key determines what you want the modules to do.

If the standard <CTRL> and <SHIFT> hotkeys are also needed for computer tasks, you can change them for another combination using switches 2 and 3 on the REMOTE module:

2 OFF

Hotkeys = <CTRL> and <SHIFT> (default setting)

3 OFF

 

2 OFF

Hotkeys = <ALT> and <SHIFT>

3 ON

 

2 ON

Hotkeys = <CTRL> and <ALT>

3 OFF

 

2 ON

Hotkeys disabled

3 ON

 

LINDY KVM Extender C5 PRO-300 Installation and Use

page 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents KVM Extender C5 PRO-300 Safety Information Warranty informationAbout this manual TrademarksContents Special Configuration Introduction Supplied items Installation Configuration switch settings Local SwitchSoftware can be changed. See . Flash upgrade procedure Password overrideRemote Switch Remote Switches 2Mounting a module desk or rack General remarkDesk mount Rack mountConnections KVM+A multi-cable connectionSerial cable connection Optional power connectionTwisted pair connection Twisted pair, power and serial connections Keyboard, video and mouse connectionsAudio connections Power and activity indicators OperationGeneral Use Locking and unlocking the systemSpecial configuration Password setting To exit from the configuration modeTo set a password To override the Remote password Which restore setting do I use?Hot plugging and mouse restoration Recognising an IntelliMouse style mouseTo restore mouse operation when hot plugging Microsoft and Logitech specific mouse settingsTo change mouse signalling protocols Recognising an IntelliMouse driverVideo compensation, Image controls sharpness and brightness To display a suitable high contrast imageTo use the image controls SharpnessSkew Compensation Adjustment To use skew adjustmentMiscellaneous settings Report Extender C5 firmware version F 1 ReturnGet the upgrade files from Lindy Technical Support Flash upgrade procedureCreate a startup disk Reconfigure the Remote connections and begin Reconfigure the Local connections and beginCopy the downloaded files to the disk Return all connections to their usual states No video image is received at the Remote module TroubleshootingOn-screen mouse pointer does not respond to mouse movements Extender C5 Accessories Lindy C5 Series Power distribution module Part NoSound from the microphone cannot be heard or is very quiet Lindy C5 Series Rack mount chassis Part NoFCC Compliance Statement United States European EMC directive 89/336/EECCanadian Department of Communications RFI statement
Top Page Image Contents