Operating the
6.4.1Storing an Input/Output Configuration
To store1 the current status in memory, do the following:
1.Press the STO button. The STO button blinks.
2.Press one of the 6 LEAF buttons (this will be the setup # in which the current status is stored). If in the CONFIRM mode, press the blinking TAKE button to confirm the action.
That setup # flashes brightly in the
6.4.2Recalling an Input/Output Configuration
To recall a configuration, do the following:
1.Press the RCL button. The RCL button blinks.
2.Press the appropriate LEAF button (the button # corresponding to the setup #). If in the CONFIRM mode, that setup configuration will blink in the
The memory recalls the stored data from that reference.
Tip: If you cannot remember which of the 6 configurations is the one that you want, set the
6.5 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the front panel buttons, lock2 your
To lock the
Press and hold the LOCK button until the LOCK button is illuminated The front panel is locked. Pressing a button will have no effect.
To unlock the
Press and hold the illuminated LOCK button, until the LOCK button is no longer illuminated
The front panel unlocks
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
2 Nevertheless, even though the front panel is locked you can still operate via
15