IOGear GIC704SR5W6, M0560 manual Windows XP Existing Installation

Page 19

Windows XP Existing Installation

1.Power off the system. Insert the controller card into a PCI slot and connect the hard drives to the control- ler card. Power up the system.

2.During OS boot up, Windows will display the ‘Found New Hardware Wizard’. Click ‘Next’.

3.Select ‘Install from a list or speciﬁc location (Advanced)’ and Click ‘Next’.

19

Image 19

Contents Installation Guide Page Table of Contents Page Introduction PCI Interface FeaturesHigh Speed Serial ATA Interface Package Contents Disk Mirroring RAID What Is RAID?RAID Redundant Array of Independent Disks Disk Striping RAIDParity RAID RAID Mirrored-Striping RAID 0+1 also known as RAIDJust a Bunch of Disks JBOD/Contiguous Installation Procedure Use the SATARAID5 Manager GUI to conﬁgure your RAID settings Select the Number of hard drives. Press Enter Bios RAID SettingsCreating Striped Sets RAID Select Create RAID set. Press EnterSelect Auto conﬁguration. Press Enter Creating Mirrored Sets RAIDSelect Create RAID set. Press F2 Creating a Mirrored-Striped Set RAIDCreating Parity RAID RAID Creating Spare Drive Creating Jbod Sets Select Spare Drives. Press Enter Select Delete RAID set. Press Enter Deleting RAID SetsRebuilding Mirrored Sets RAID Windows XP Fresh Installation Software InstallationWindows XP Existing Installation Page Verifying controller installation Federal Communications Commission FCC Statement Page CE Statement Limited Warranty Toll Free 866 9-IOGEAR Phone 949 453-8782 23 Hubble ContactPage FUN