KTI Networks KF-16MS manual Dual-speed Hub with Built-in 10/100 Switch

Page 10

KF-16MS is equipped with an internal 10M-to-100M switch function to bridge the traffics between 10Mbps segment and 100Mbps segment as follows:

Figure 1-3 Dual-speed Hub with Built-in 10/100 Switch

The 10M-to-100M switch can perform packet forwarding from one seg- ment to another at wire speed. It also performs the address filtering that only forwards those packets which need to cross 10M and 100M seg- ments.

4

Image 10
Contents Port Dual-speed Ethernet / Fast Ethernet Hub KF-16M, KF-16MSUnited States DOC.980302-KF16M/16MS-NK P/N Trademarks LED Indicators Table of Contents IntroductionInstalling the Dual-speed Hub Making Network ConnectionsFigures Introduction Dual-Speed Ethernet / Fast Ethernet Hub UnitsFeatures Dual-speed Hub Technology Dual-speed Hub DesignDual-speed Hub with Built-in 10/100 Switch Specifications Mounting the Hub Installing the Dual-speed HubPacking List Desktop MountingInstall Rack Mount Brackets Rack MountingFront Panel and Rear Panel Components on the Front and Rear PanelAC Power Socket 1X 16X RJ-45 ConnectorsAC Power Switch Cascading Multiple Hubs Cascading Two HubsCascading Four Hubs in One Stack Making Network Connections RJ-45 ConnectorsDual-speed Twisted-pair Ports UTP Cables Straight-through UTP and Crossover UTPConnecting to a Computer Connecting to Computers Connecting to 10BASE-T HubsConnecting to a 100BASE-TX Hub Switch Connected UTP cable used Maximum lengthConnecting Two Hub Stacks Hub Stack ConnectionLED Panel LED IndicatorsInterpretation 10M Link The port has a good link to a 10M Ethernet device