KTI Networks KPOE-800-1P, KPOE-800-2P manual United States, International

Page 2

(C)2008 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from KTI Networks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

United States

KTI Networks Inc.

 

P.O. BOX 631008

 

Houston, Texas 77263-1008

 

Phone:

713-2663891

 

Fax:

713-2663893

 

E-mail:

kti@ktinet.com

 

URL:

http://www.ktinet.com/

International

Fax:

886-2-26983873

 

E-mail:

kti@ktinet.com.tw

 

URL:

http://www.ktinet.com.tw/

2

Image 2
Contents Modular 8-Port Mid-span Power over Ethernet Injector Installation GuideUnited States InternationalTrademarks Table of Contents Features IntroductionProduct Panels Mid-span Injector FunctionSpecifications Model DefinitionPower Consumption Power Module Slots LED IndicatorsPower Input Power DissipationUnpacking InstallationSafety Cautions Rack Mounting Mounting the InjectorDesktop Mounting Mounting one unit in a rackMounting two units in a rack Installing Power Module Unplug the AC power cord before any installationApplying AC Power SpecificationsNetwork Cables Making Switch Port ConnectionsMaking LAN Connections Making Powered Device Connections Under voltage LED IndicationShort-circuit Function State InterpretationApplications Application with Low Power RequirementsApplication with High Power Requirements