KTI Networks KPOE-800-2P, KPOE-800-1P manual Trademarks

Page 3

The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

FCC NOTICE

This device complies with Class A Part 15 the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including the interference that may cause.

CE NOTICE

Marking by the symbol indicates compliance of this equipment to the EMC directive of the European Community. Such marking is indicative that this equipment meets or exceeds the following technical standards:

EMC Class A

EN 50081-1/1992 :EN55022:1994/A1:1995/A2:1997 Class A

EN61000-3-2:2000

EN61000-3-3:1995/A1:2001

EN 55024:1998/A1:2001

IEC 61000-4-2:1995

IEC 61000-4-3:1995

IEC 61000-4-4:1995

IEC 61000-4-5:1995

IEC 61000-4-6:1996

IEC 61000-4-8:1993

IEC 61000-4-11:1994

3

Image 3
Contents Installation Guide Modular 8-Port Mid-span Power over Ethernet InjectorInternational United StatesTrademarks Table of Contents Introduction FeaturesMid-span Injector Function Product PanelsModel Definition SpecificationsPower Dissipation Power Module Slots LED IndicatorsPower Input Power ConsumptionInstallation Safety CautionsUnpacking Mounting one unit in a rack Mounting the InjectorDesktop Mounting Rack MountingMounting two units in a rack Unplug the AC power cord before any installation Installing Power ModuleSpecifications Applying AC PowerMaking Switch Port Connections Making LAN ConnectionsNetwork Cables Making Powered Device Connections Function State Interpretation LED IndicationShort-circuit Under voltageApplication with Low Power Requirements Application with High Power RequirementsApplications