KTI Networks KPOE-800-1P, KPOE-800-2P manual Product Panels, Mid-span Injector Function

Page 6

Modular PoE power upgradability

19" rack mounting support

1.2 Product Panels

The following figure illustrates the faces of the injector:

1.3 Mid-span Injector Function

The PoE mid-span power injector is designed and tested for use with all IEEE802.3af compatible PoE PDs. The PoE injector sits between a switch port and the PoE powered device, providing inline power capability to an un-powered switch port.

Image 6

Contents Modular 8-Port Mid-span Power over Ethernet Injector Installation GuideUnited States InternationalTrademarks Table of Contents Features IntroductionProduct Panels Mid-span Injector FunctionSpecifications Model DefinitionPower Consumption Power Module Slots LED IndicatorsPower Input Power DissipationInstallation Safety CautionsUnpacking Rack Mounting Mounting the InjectorDesktop Mounting Mounting one unit in a rackMounting two units in a rack Installing Power Module Unplug the AC power cord before any installationApplying AC Power SpecificationsMaking Switch Port Connections Making LAN ConnectionsNetwork Cables Making Powered Device Connections Under voltage LED IndicationShort-circuit Function State InterpretationApplication with Low Power Requirements Application with High Power RequirementsApplications