4-2-6. LACP
Smart Web Switch supports link aggregation IEEE802.3ad standard. The standard describes Link Aggregate Control Protocol (LACP) which dynamically creates and manages trunk groups.
When you enable LACP link aggregation on a port, the port can automatically negotiate with the ports at the remote end of a link to establish trunk groups. LACP also allows port redundancy, that is, if an operational port fails, then one of the “standby” ports become operational without user intervention.
Function name:
LACP Port Configuration
Function description:
Enable or disable LACP protocol, user is allowed to set the aggregation key value.
Parameter description:
Protocol Enabled:
Just tick the check box (;) to enable LACP protocol then press the <Apply> button to apply.
Key Value:
It’s key for an aggregation. This must be an integer value between 1 and 255 or auto select by switch.
Fig. 4-11 LACP Port Configuration
61