KTI Networks KGS-2404 manual Resolving No Link Condition, Q&A

5. Maintenance

5-1. Resolving No Link Condition

The possible causes for a no link LED status are as follows:

zThe attached device is not powered on

zThe cable may not be the correct type or is faulty

zThe installed building premise cable is faulty

zThe port may be faulty

5-2. Q&A

1.Computer A can connect to Computer B, but cannot connect to Computer C through the 24-Port GbE Web Smart Switch.

9 The network device of Computer C may fail to work. Please check the link/act status of Computer C on the LED indicator. Try another network device on this connection.

9 The network configuration of Computer C may be something wrong. Please verify the network configuration on Computer C.

2.The uplink connection function fails to work.

9The connection ports on another must be connection ports. Please check if connection ports are used on that 24-Port GbE Web Smart Switch.

9Please check the uplink setup of the 24-Port GbE Web Smart Switch to verify the uplink function is enabled.

3.The console interface cannot appear on the console port connection.

924-Port GbE Web Smart Switch has no console port, so you cannot use console interface to connect with 24-Port GbE Web Smart Switch.

4.How to configure the 24-Port GbE Web Smart Switch.

9User can use IE browser program in window series of computer to control the web smart functions in 24-Port GbE Web Smart Switch. First, choose any port in 24-Port GbE Web Smart Switch. Then, use IE and type default IP address, 192.168.1.1, to connect to 24 Gigabit with RJ45 network line. Finally, the login screen will appear at once.

100