KTI Networks 2028 manual Front Panel and Rear Panel, One 10/100BASE-TX switched port Port #9

2.3 Front Panel and Rear Panel

Figure 2-4 Components on the Front and Rear Panel

•Eight 10BASE-T switched ports (Port #1 to Port #8)

Each port consists of an RJ-45 connector and is used for connec- tion to a 10BASE-T hub or node.

•One 10/100BASE-TX switched port (Port #9)

The port consists of an RJ-45 connector and is used for connection to a 10BASE-T or 100BASE-TX device (hub or node).

•Crossover switches for Port #8 and Port #9

Each crossover switch is provided for configuring the pin assign- ments of the associated RJ-45 connector.

•One expansion port slot (Port #10)

The port slot can accommodate one optional port module. Two types of port modules can be selected. One is a 10/100BASE-TX port module and the other is a 100BASE-FX port module. Refer to section 2.4 for how to install the module into the slot.

6