KTI Networks 2028 manual pair Straight UTP Cable

Page 18

The following table lists the devices to which Port #8 can connect :

Device connected

Crossover SW

Computer 10BASE-T port

 

X setting

10BASE-T hub port (I type)

 

X setting

10BASE-T hub port (X type)

 

I setting

10BASE-T switched port (I type)

X setting

10BASE-T switched port (X type)

I setting

Cable used Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP

Straight UTP Cable

The cable is 2-pair Category 3 or 5 UTP and maximum length is 100 meters. The pin assignments are shown as follows:

Figure 3-2 2-pair Straight UTP Cable

13

Image 18
Contents KTI 10/100 Fast Ethernet Switch KS2028United States 10/100 Fast Ethernet Switch Installation Guide Trademarks LED Indicators Table of Contents IntroductionInstalling the Switch Making Network ConnectionsSwitch Unit IntroductionFeatures Specifications Installing the Switch Mounting the SwitchPacking List Install Rack Mount Brackets Rack MountingFront Panel and Rear Panel One 10/100BASE-TX switched port Port #9Crossover switches for Port #8 and Port #9 One expansion port slot Port #10Configuration switches Installing an Optional Port ModuleDiagnostic LED indicators 10/100BASE-TX port moduleRemove the Slot Cover Setting the Configuration Switches Factory Default Settings Port Connecting to Setting Important NoteNetwork Switched Ports Making Network Connections10BASE-T Switched Ports Straight UTP Cable 2-pair Straight UTP Cable10/100BASE-TX Switched Ports Cable Type and Maximum LengthDevice connected Duplex mode 100BASE-FX ModuleLED Indicators LED PanelInterpretation