KTI Networks 2028 manual 10/100BASE-TX Switched Ports, Cable Type and Maximum Length

3.3 10/100BASE-TX Switched Ports

This section applies to the 10/100BASE-TX Port #9 and expansion slot Port #10 pre-configured with a 10/100BASE-TX port module. Use the crossover switch to set the type of RJ-45 connector as follows:

The following table lists the devices to which the ports can connect:

Device connected	Crossover SW
Computer 10BASE-T port	X setting
10BASE-T hub port (I type)	X setting
10BASE-T hub port (X type)	I setting
10BASE-T switched port (I type)	X setting
10BASE-T switched port (X type)	I setting
100BASE-TX hub port (I type)	X setting
100BASE-TX hub port (X type)	I setting
100BASE-TX switched port (I type)	X setting

100BASE-TX switched port (X type) I setting

Cable Type and Maximum Length

Cable used Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 3, 5 straight UTP Cat. 5 straight UTP Cat. 5 straight UTP Cat. 5 straight UTP Cat. 5 straight UTP

Connection	UTP Cable Category	Maximum length
10BASE-T (10Mbps)	Cat. 3, 5	100 meters
100BASE-TX (100Mbps)	Cat. 5	100 meters

14