IOGear GCS1742 user manual Manual Switching

Page 18

Operation

Manual Switching

1.Press and release a port selection switch to bring the KVM focus to the computer attached to its corresponding port. The USB and Audio focus does not change; they stay on the port that they’re already on.

2.Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port

3.Press and hold port selection switches 1 and 2 for more than two seconds to start Auto Scan Mode.

Tip: To stop Auto Scan mode, simply press any of the port selection switches on the KVM.

18

Image 18
Contents MiniView Dual View USB Kvmp Switch Page Welcome Table of Contents Package Contents Overview Features Computer System RequirementsConsole AudioIntroduction Port selection buttonsPort LEDs KVM USB PortConsole Port Section Power JackFirmware Upgrade Port CPU Port SectionIntroduction Installation Before you BeginCable Connection Connection for USB Computers Powering Off and Restarting OperationHot Plugging Port Switching Port ID NumberingManual Switching Hotkey Operation Hotkey OperationHotkeys Actions Auto Scanning Hotkey ActionInvoking Hotkey Mode To Invoke Hotkey Mode PC-Compatible keyboardTo invoke Hotkey Mode Mac keyboards Hotkey Operation Alternate Hotkey Mode Invocation Keys Alternate Port Switching Keys Keyboard Operating Platform Disable Port Switching Keys List Hotkey SettingsUSB Reset Hotkey Beeper ControlFirmware Upgrade Mode Restore Default SettingsSun Keyboard Emulation Operation MAC Keyboard Emulation Firmware Upgrade Utility Before You BeginFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Fireware Upgrade Firmware Upgrade RecoveryTroubleshooting AppendixSpecification Specification Technical Support Radio &TV Interference Statement LimitedWarranty