IOGear GCS1742 user manual Hotkey Operation

Page 24

Hotkey Operation

Note:

If using the Num Lock and Minus key to invoke Hotkey function is not optimal for your setup, refer to the next page to change the hotkey invocation keys.

When Hotkey Mode is active, the Caps Lock and Scroll Lock LEDs flash in succession to indicate that HSM is in effect. They stop flashing and revert to normal status when you exit HSM.

Ordinary keyboard and mouse functions are suspended – only Hotkey compliant keystrokes and mouse clicks can be input.

At the conclusion of some hotkey operations, you automatically exit Hotkey mode. With some operations, you must exit manually by pressing the Esc or Spacebar on your keyboard.

24

Image 24
Contents MiniView Dual View USB Kvmp Switch Page Welcome Table of Contents Package Contents Overview Features System Requirements ConsoleComputer AudioIntroduction Port selection buttonsPort LEDs KVM USB PortPower Jack Firmware Upgrade PortConsole Port Section CPU Port SectionIntroduction Installation Before you BeginCable Connection Connection for USB Computers Powering Off and Restarting OperationHot Plugging Port Switching Port ID NumberingManual Switching Hotkey Operation Hotkey OperationHotkeys Actions Auto Scanning Hotkey ActionInvoking Hotkey Mode To Invoke Hotkey Mode PC-Compatible keyboardTo invoke Hotkey Mode Mac keyboards Hotkey Operation Alternate Hotkey Mode Invocation Keys Alternate Port Switching Keys Keyboard Operating Platform List Hotkey Settings USB ResetDisable Port Switching Keys Hotkey Beeper ControlFirmware Upgrade Mode Restore Default SettingsSun Keyboard Emulation Operation MAC Keyboard Emulation Firmware Upgrade Utility Before You BeginFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Fireware Upgrade Firmware Upgrade RecoveryTroubleshooting AppendixSpecification Specification Technical Support Radio &TV Interference Statement LimitedWarranty