IOGear GCS1742 user manual Firmware Upgrade Mode, Restore Default Settings

Page 29

Hotkey Operation

Firmware Upgrade Mode

To set the GCS1742/GCS1744 in firmware upgrade mode:

1.Invoke Hotkey Mode

2.Key in: upgrade

3.Press [Enter]

Note: The front panel LEDs will flash to indicate that the KVM is in firmware upgrade mode. To exit firmware upgrade mode, you must power off the switch.

Restore Default Settings

To reset the GCS1742/GCS1744 to its factory default settings, do the following:

1.Invoke Hotkey Mode

2.Press [R] [Enter]

29

Image 29
Contents MiniView Dual View USB Kvmp Switch Page Welcome Table of Contents Package Contents Overview Features Console System RequirementsComputer AudioPort LEDs IntroductionPort selection buttons USB Port KVMFirmware Upgrade Port Power JackConsole Port Section CPU Port SectionIntroduction Before you Begin InstallationCable Connection Connection for USB Computers Hot Plugging Powering Off and RestartingOperation Port ID Numbering Port SwitchingManual Switching Hotkey Operation Hotkey OperationHotkeys Actions Hotkey Action Auto ScanningTo Invoke Hotkey Mode PC-Compatible keyboard Invoking Hotkey ModeTo invoke Hotkey Mode Mac keyboards Hotkey Operation Alternate Hotkey Mode Invocation Keys Alternate Port Switching Keys Keyboard Operating Platform USB Reset List Hotkey SettingsDisable Port Switching Keys Hotkey Beeper ControlRestore Default Settings Firmware Upgrade ModeSun Keyboard Emulation Operation MAC Keyboard Emulation Before You Begin Firmware Upgrade UtilityFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Recovery Fireware UpgradeAppendix TroubleshootingSpecification Specification Technical Support Radio &TV Interference Statement LimitedWarranty