IOGear GCS1742 user manual Firmware Upgrade Utility

Page 34

The Firmware Upgrade Utility

4.Shut down the computers on your MiniView™ Extreme installation and make sure you have set

the KVM in firmware upgrade mode as instructed under section Hotkey operation → Firmware upgrade mode

5.Make sure the power is plugged into the KVM.

Once the power is plugged in and the switch is set to upgrade, all of the amber lights on the KVM will flash once per second. Now you are ready to run the firmware upgrade utility.

34

Image 34

Contents MiniView Dual View USB Kvmp Switch Page Welcome Table of Contents Package Contents Overview Features Computer System RequirementsConsole AudioPort selection buttons IntroductionPort LEDs KVM USB PortConsole Port Section Power JackFirmware Upgrade Port CPU Port SectionIntroduction Installation Before you BeginCable Connection Connection for USB Computers Operation Powering Off and RestartingHot Plugging Port Switching Port ID NumberingManual Switching Hotkey Operation Hotkey OperationHotkeys Actions Auto Scanning Hotkey ActionInvoking Hotkey Mode To Invoke Hotkey Mode PC-Compatible keyboardTo invoke Hotkey Mode Mac keyboards Hotkey Operation Alternate Hotkey Mode Invocation Keys Alternate Port Switching Keys Keyboard Operating Platform Disable Port Switching Keys List Hotkey SettingsUSB Reset Hotkey Beeper ControlFirmware Upgrade Mode Restore Default SettingsSun Keyboard Emulation Operation MAC Keyboard Emulation Firmware Upgrade Utility Before You BeginFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Fireware Upgrade Firmware Upgrade RecoveryTroubleshooting AppendixSpecification Specification Technical Support Radio &TV Interference Statement LimitedWarranty