Installation
Setup and Installation
1.Plug your USB keyboard and USB mouse into the USB Ports located on the unit’s front panel. Plug your monitor into the Console monitor port located on the unit’s rear panel.
Note: For computers with older operating systems, such as Windows ME or prior, you may have to load the USB driver. Keep your OS CD ROM handy during installation. If it is the first time you load the USB driver on this type of computers, there is a big chance that you may need to keep the old keyboard and mouse on that computer until the driver is loaded.
2.Plug the custom SPDB15 connector of the KVM cables into any available CPU ports on the switch and plug the accompanying microphone and speaker cables into the CPU port’s microphone and speaker jacks.
3.Plug the other end of the KVM cable to the respective ports on the computer.
For a PS/2 connection, you will need to purchase the PS/2 KVM cable (IOGEAR Part No. G2L5302P), plug the keyboard, mouse, video, microphone and speaker cables into their respective ports on the computer.
11