Introduction
Front View
1
1. Port Selection Buttons
Pressing the port selection buttons to access the computer connected to its corresponding port.
Pressing Buttons 1 and 2 simulta- neously for 2 seconds performs a keyboard and mouse reset.
23
Pressing Buttons 3 and 4 simulta- neously for 2 seconds starts Auto Scan Mode. See p.18 for details.
2. Port LEDs
The Port LEDs are built into the Port Selection Switches. The upper ones are the KVM Port Status LEDs; the lower ones are the USB Peripheral Selected LEDs:
KVM Status LEDs: Lights DIM ORANGE to indicate that the computer attached to the corresponding port is up and running (On Line); lights BRIGHT ORANGE to indicate that the computer attached to its corresponding port is the one that has the KVM focus (Selected); flashes to indicate that the computer attached to its corresponding port is being accessed under Auto Scan mode.
6