Appendix
Appendix: Diagnostic Mode
If you’ve had problems with the setup of your print server in your wireless network, please refer to the following steps:
1.Change the print server to diagnostic mode by switching the DIP switch to DIAG mode (the side near to power connector.)
2.Change your wireless adapter to 802.11b
3.Click Start > Programs > Network Print Server > PSAdmin. Once PSAdmin starts, it will automatically start searching for your print server.
4.Once PSAdmin finds your print server, double click on the Device name to open the properties window.
5.Select the Wireless tab. Enter the ESSID, Channel, Rates that meet your network environment, then press OK.
71