KTI Networks KCD-302 Series manual DC Power Input, Basic Information, Mechanical, Environmental

DC Power Input
Interface	Screw-type terminal block
	(2 sets for power wire cascading)
	DC Jack ( -D 6.3mm / + D 2.0mm)
Operating Input Voltages	+7V~+30V(+5%)
Power consumption	2.7W max. @7.5VDC input
	2.9W max. @24VDC input
	3.0W max. @+30VDC input
Basic Information
MAC Addresses Entries	1K
Forwarding Throughput	Full wire speed at 100M full duplex
	10Mbps - 14,880 pps at 64-byte packets
	100Mbps - 148,800pps at 64-byte packets
Forwarding Packet Types	Transparent and no modification for
	- IEEE 802.3 standard packets
	- IEEE 802.1Q VLAN tagged packets
Packet Length	Up to 1536 bytes at store-and-forward mode
Flow Control	Back-pressure for half-duplex mode
	802.3x pause-frame base for full duplex mode
Far End Fault Function	Supported on both FX ports
Mechanical
Dimension (base)	W28mmxD82mmxH95mm
Housing	Enclosed metal with no fan
Mounting Support	DIN-rail mounting, Panel mounting
Weight	250g
Environmental
Operating Temperature	Typical -20oC ~ 70oC (model dependent)
Storage Temperature	-20oC ~ 85oC
Relative Humidity	5% ~ 90%

-11-