KTI Networks KCD-302 Series manual Installation, Unpacking

Page 15

2. Installation

2.1 Unpacking

Check that the following components have been included:

•Information CD

•The product unit

•DIN-rail mounting bracket

If any item is found missing or damaged, please contact your local reseller for replacement.

The following are available optional accessories:

•Panel Mounting Bracket

The bracket is used for mounting the converter on a panel surface.

•Commercial-rated AC power adapters:

Rated AC120V/60Hz DC7.5V 1A

Rated AC230V/50Hz DC7.5V 1A

Rated AC100V/50-60Hz DC7.5V 1A

Rated AC240V/50Hz DC7.5V 1A

The adapters are used for supplying DC power to the converter via DC power jack interface.

-15-

Image 15

Contents Tri-segment Media Converter IndustrialInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Page Features Specifications Fiber Optic Interfaces FX1 Port, FX2 Port Twisted-Pair Interface TPPort, or called copper PortLEDIndicators ConfigurationSettingSwitchesSWEnvironmental DC Power InputBasic Information MechanicalCE/EMC CertificateOptical Specifications Model SpecificationsAuto-negotiation Function Far End Fault FunctionSpecial Functions AutoMDI/MDI-XFunctionUnpacking InstallationDIN-Rail Mounting Page Page Mounting on a Panel Surface Page Applying Power DC Power Input SpecificationDC PowerTerminal Block DC Power Jack Configuration Setup Making TP Port ConnectionNetwork Cables Making FX Port Connections Configuration Switches & LED Indicators Configuration Switches TP Port Settings SW1-SW32 802.3x Function Setting SW4 FX Port Duplex Settings SW5 SW6 Factory Default SettingsLink Partner of FX Port Distance MMF cable LED Display Status & Interpretation LED Indicators