Kramer Electronics VS-84H user manual Storing and Recalling a Switching Setting from a Preset

Page 16

Operating the VS-84H 8x4 HDMI Matrix Switcher

7.3Storing and Recalling a Switching Setting from a Preset

The STO and RCL buttons are used to store and recall up to 12 setups which are assigned using the 4 output (preset 1 to 4) and 8 input (preset 5 to 12) buttons.

To store a preset1 (for example, Input 4/Output 3 in preset 10):

1.Configure the switching as required for the preset (for example, Input 4 to Output 3).

2.Press the STO button. The STO button flashes.

3.Select an OUT or IN SELECT button to store the device setting (for example, IN 6 for preset 10).

4.Press the LOCK button2 to store the current setup. The STO button stops flashing.

To recall a preset (for example, preset 10):

1.Press the RCL button. The RCL button flashes.

2.Press the relevant OUT or IN button that stored the preset (for example, IN 6/preset 10).

3.Press the LOCK button to recall the stored preset. The RCL button stops flashing.

7.4Resetting the VS-84H 8x4 HDMI Matrix Switcher’s IP Parameters

Note: This procedure resets only the IP related parameters. All switching and preset values remain unchanged.

To reset the IP parameters to their default values (see Table 4):

•Press and hold the ETH Reset button on the rear panel while powering up the device

7.5Connecting to the VS-84H 8x4 HDMI Matrix Switcher via RS-232

You can connect to the VS-84Hvia an RS-232 connection using, for example, a PC. Note that a null-modem adapter/connection is not required. To connect to the product via RS-232:

•Connect the RS-232 9-pin D-sub on the rear panel of the VS-84Hvia a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your PC

1 You can set each of the inputs/outputs independently; you are not limited to a single input/output combination 2 You have to press the LOCK button within a few seconds or the procedure automatically times out

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model Contents FiguresTables Introduction Getting StartedKramer Simple Creative Technology Overview Defining the EdidAbout Hdmi About HdcpDefining the VS-84H 8x4 Hdmi Matrix Switcher Recommendations for Best PerformanceFeature Function ETH Reset Button Using the IR Transmitter Installing the VS-84H in a Rack Connecting the VS-84H 8x4 Hdmi Matrix Switcher Connecting the VS-84H 8x4 Hdmi Matrix SwitcherSwitching an Input to an Output Operating the VS-84H 8x4 Hdmi Matrix SwitcherAcquiring the Edid Acquiring the Edid from Several Outputs Storing and Recalling a Switching Setting from a Preset Connecting to the VS-84H 8x4 Hdmi Matrix Switcher via RS-232Select Properties Upgrading the Firmware Internet Protocol TCP/IP Properties WindowTechnical Specifications Default EdidDefault Edid Detailed timing #5 1280x720p at 50Hz Default Communication Parameters Default Communication ParametersKramer Protocol Protocol DefinitionsInstruction Codes for Protocol 82 ie. request the number of outputs Only the first purchase customer may enforce this warranty SePPKPPPcSS

VS-84H specifications

Kramer Electronics VS-84H is a high-performance HDMI matrix switcher designed to provide seamless signal management for multiple input sources and output displays. Integrating advanced technology, the VS-84H facilitates efficient control over audio and video routing, making it an ideal solution for a variety of applications, including conference rooms, educational institutions, and video production environments.

One of the standout features of the VS-84H is its ability to handle up to eight HDMI inputs, allowing users to connect a range of video sources such as computers, projectors, Blu-ray players, and gaming consoles. With four HDMI outputs, the switcher can route high-definition video signals to multiple displays simultaneously, providing flexibility in setup and operation.

The VS-84H supports video resolutions up to 4K at 60Hz, ensuring high quality image reproduction that meets the demands of modern video content. Additionally, it is compatible with HDMI 2.0 standards, which allows for enhanced bandwidth and improved color depth, giving users a richer visual experience without sacrificing performance.

In terms of audio capabilities, the switcher supports embedded audio as well as multi-channel audio formats. This feature enables users to manage audio output seamlessly, which is particularly advantageous in environments where sound is critical. The unit’s audio de-embedding functionality allows audio signals to be extracted for separate processing or distribution.

The Kramer VS-84H further enhances usability with its sophisticated control options. Users can manage the switcher through various methods, including front panel buttons, RS-232, and IP control. These versatile control options empower users to integrate the matrix switcher into existing system designs effortlessly.

Built with durability in mind, the VS-84H features a robust housing and cooling design that ensures reliable long-term operation, even in demanding settings. This reliability is crucial for users who require uninterrupted performance, especially in commercial applications.

In summary, Kramer Electronics VS-84H stands out as a powerful HDMI matrix switcher that combines high-resolution video support, advanced audio capabilities, and flexible control options. Its versatility and robust design make it an ideal choice for professionals seeking a dependable solution for signal routing in diverse environments.
Top Page Image Contents