Kramer Electronics VS-84H user manual Select Properties

Operating the VS-84H 8x4 HDMI Matrix Switcher

7.6Connecting to the VS-84H 8x4 HDMI Matrix Switcher via Ethernet

You can connect the VS-84Hvia the Ethernet, using a crossover cable (see Section 7.6.1) for direct connection to the PC or a straight through cable (see Section 7.6.2) for connection via a network hub or network router1.

7.6.1Connecting the Ethernet Port directly to a PC

You can connect the Ethernet port of the VS-84Hto the Ethernet port on your PC via a crossover cable with RJ-45 connectors.

This type of connection is recommended for identification of the factory default

IP Address of the VS-84Hduring the initial configuration

After connecting the Ethernet port, configure your PC as follows:

1.On your desktop, right-click the My Network Places icon.

2.Select Properties.

3.Right-click Local Area Connection Properties.

4.Select Properties.

The Local Area Connection Properties window appears.

5.Select the Internet Protocol (TCP/IP) and click the Properties Button (see Figure 4).

Figure 4: Local Area Connection Properties Window

1 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the “Ethernet Configuration (FC-11) guide.pdf” file in the technical support section at http://www.kramerelectronics.com