Kramer Electronics PIP-200 user manual

NOTE

When clicking "Exit", the program automatically stores the active port number. When the program is run again, this port number automatically appears.

Settings Sub Menu - Click on Settings. The Settings sub menu appears:

Port - Defines the active serial port click on the Port button. When the

(COM1-COM4)to which the PIP-200 is connected. To select a port, Port screen appears, select the desired port and then click Ok.

Reset - Enables selection of two types of configurations: Power down, or Factory default:

Clicking on Power down resets the machine and as a result the last saved settings appear on both the screen and the front panel.

Clicking on Factory default resets the machine and as a result the Factory default settings appear on both the screen and the front panel.

10

KRAMER ELECTRONICS LTD.