Kramer Electronics user manual Getting to Know Your PIP-200, Feature Function

5GETTING TO KNOW YOUR PIP-200

The KRAMER PIP-200is a Multi-Standard Picture in Picture Video Inserter designed for studio and other applications for monitoring and special effects generation. Front panel switches control the size of the inserted picture (1/4, 1/9, 1/16 or 1/36th of the screen), its position, its border color and matte color and they can also be used to freeze the inserted picture. The user can flip between the inserted and background image, with a key or wipe effect. A single color can be displayed instead of the background video source and the user can flip between the inserted picture and the background image, using a front panel switch. Additional features of the PIP-200include the ability to insert an NTSC image into a PAL background and vice versa. When turned off, the machine saves its settings in an internal EEPROM, recalling them when it is turned on again. The encoder's power up settings (PAL, NTSC, NTSC4.43) can be selected via internal jumpers inside the machine. Control of the machine is also possible via its RS-232 port with the software which is provided with the machine. Front/rear panel features of the PIP-200are described in Figure 1, Table 2 and Table 3.

		Figure 1: PIP-200 Front/Rear Panel Features
			Table 2: PIP-200 Front Panel Features
No.	Feature		Function
1.	Power Switch		Illuminated switch supplies power to the unit.
2.	PAL pushbutton		When pressed, illuminates and selects PAL encoding for the output.
3.	NTSC pushbutton		When pressed, illuminates and selects NTSC encoding for the output.
4.	NTSC 4.43 pushbutton		When pressed, illuminates and selects NTSC 4.43 encoding for the output.
5.	ON pushbutton		Toggles the PIP insert function on and off. Illuminated when on is selected.
6.	WIPE pushbutton		Wipes the inserted picture in and out.
7.	FREEZE pushbutton		Toggles the freezing of the inserted picture. Illuminates when frozen.
8.	INVERT pushbutton		Toggles the swapping of the inserted and background picture. Illuminates when
			swapped.
9.	SIZE pushbutton		Selects the inserted picture size (1/4,1/9,1/16 or 1/36th of the screen.
10.	BORDER pushbutton		Toggles the border around the inserted picture. Illuminates when a border is
			selected.
11.	MATT pushbutton		Toggles a Matte (single color) background. Illuminates when Matte is selected.
12.	Y pushbutton		Press to set the color of the border or the Matte. (Y component).
13.	R-Ypushbutton		Press to set the color of the border or the Matte. (V component).
14.	B-Ypushbutton		Press to set the color of the border or the Matte. (U component).

4

KRAMER ELECTRONICS LTD.