4.1Optional Accessories
The following accessories, which are available from Kramer, can enhance implementation of your machine. For information regarding cables and additional accessories, contact your Kramer dealer.
VS-5x4- (5x4 Video/ Stereo Audio Matrix Switcher) can be serially connected between sources and the PIP- 200 for video and audio input switching. The VS-5x4 may also be used as one 1:4 or two 2:2 Y/C-video/audio DAs or any other combination as well. The VS-5x4 switches during the vertical interval for smooth transitions between genlocked sources. It is microprocessor and RS-232 controlled (software included), and is operated by touching a keypad on the front panel. Front switches control the audio level of each output. Large illuminated seven segment LED displays show the connection status of the machine at any given moment.
VS-4x4YC- (4x4 Composite/YC/Audio matrix) can be serially connected between the PIP-200 and its sources or between the PIP-200 and the acceptor. The Kramer VS-4x4YCis a high performance 4x4 vertical interval matrix switcher for composite and/or s-Video and stereo audio signals. It is a true matrix, allowing the user to route any input to any or all outputs simultaneously. Since the VS-4x4YCswitches during the vertical interval, transitions are glitch-free when sources share common reference sync. The VS-4x4YCprovides composite video and s-Video connectors allowing it to be used for either format. Mixing formats is possible but composite video sources need to be routed to composite video outputs and s-Video sources must be routed to s-Video outputs. It is important to note that the VS-4x4YCdoes not perform signal format conversion. Like most Kramer switchers, the VS-4x4YCcan be controlled by front panel buttons or RS-232 serial commands. For applications requiring remote control via a Windows-based personal computer, K-Switch software is provided at no additional cost. It is easy to use, dependable, rugged, and fits in one vertical space of a standard 19” rack.
VM-1411(Video/Balanced Stereo Audio Distribution Amplifier) can be serially connected between the PIP-
200processor and the acceptors for video and audio distribution. It is a full broadcast, state-of-the-art machine, designed for studio and other applications. The VM-1411 has two inputs, video and audio, each splitting to 5 outputs. The user may select 2 x 1:5 or 1:10 operation via front panel control switches. Several VM-1411 units may be chained through the looping inputs. Output signals are (user selectable) DC or AC coupled for maximum flexibility. Audio outputs are buffered and isolated from each other, allowing Hi-Fi Balanced audio distribution.
SP-11- (Video/Audio Processor) can be serially connected between the video/audio source and the PIP-200 processor for video and audio control/correction. The machine provides camera control and luminance/white balance correction. The SP-11 is also capable of performing composite to Y/C conversion and bi-directional transcoding. The machine allows full control over the video signal: video gain down to full fade, log or linear definition control, log or linear contrast control, color saturation control, black level control, red, green and blue controls and a screen splitter control for “before-after” comparison.
VIDEO TESTER - A unique, patented, indispensable tool for the video professional, the video Tester is used to test a video path leading to/from an amplifier, switcher or processor. By pressing only one touch switch it can trace missing signals, distinguish between good and jittery (VCR sourced) signals, and identify the presence of good signals. Whenever a video signal is missing, because of bad connections, cable breaks or faulty sources, the video Tester is all you need.
3
KRAMER ELECTRONICS LTD.
