Regulatory Information

I. Electrical Safety Information:

A)Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connec- tion to a different power source than those speciﬁed herein may result in improper operation, damage to the equipment, invalidation of war- ranty, or a ﬁre hazard if the requirements are not followed.

B)There are no operator-serviceable parts inside this equipment. There are hazardous voltages generated by this equipment which constitute a safety hazard. Service should be provided only by a quali- ﬁed service technician.

C)This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.

1)Do not substitute the cord with other than the provided approved type. Under no circumstances use an adapter plug to connect to a 2-wire outlet as this defeats the continuity of the grounding wire.

2)The equipment requires the use of the ground wire as a part of the safety certiﬁcation. Modiﬁcation or misuse can provide a shock hazard that can result in serious injury or death.

3)Contact a qualiﬁed electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to main power.

II.Emissions and Immunity Information

A)Notice to Users in the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential or commercial installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accor- dance with the instructions, may cause harmful interference to radio communications.

Elo TouchSystems 2240L User Guide 33