Elo TouchSystems 2240L manual Connecting the Cables to the Touchmonitor and Computer

Page 8

Connecting the Cables to the Touchmonitor and Computer

Connector Panel on Rear Side of Monitor

LED

Status

Power

Button

Power Cable Serial Cable	OSD	USB	DVI-D Cable	Analog Video
	Remote	Cable	(not included	Cable
	Control		with some
	Box		European
	Connector		models)
	(Optional)

To connect your touchmonitor to your computer and power source:

1Connect one end of the power cable to the connector panel and the other end to the power outlet.

2Connect either the USB cable OR the serial cable to the rear panel of the monitor. Note: Do not use both. Connect the other end to your computer.

3Connect the video cable and/or the DVI-D cable to the rear panel of the monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. Connect the other end to your computer.

4Connect one end of the OSD remote control box connector to the rear panel of the monitor and the other end to your computer.

5Press the power button to turn the monitor on.

Elo TouchSystems 2240L User Guide 8

Image 8

Contents Elo TouchSystems 2240L 22-inch LCD Touchmonitor User Guide Revision B Elo TouchSystemsCopyright 2008 Tyco Electronics. All Rights Reserved Table of Contents About the Product PrecautionsIntroduction Installation and Setup Unpacking Your Touchmonitor Check that the following items are presentConnecting the Cables to the Touchmonitor and Computer Connector Panel on Rear Side of MonitorInstalling the Touch Driver Click on Install Driver for This ComputerMonitor Overview and Dimensions IntelliTouch Model Monitor Overview and Dimensions Surface Capacitive Model Rear View of Monitor-Portrait Orientation Monitor Mounting and OrientationRear View of Monitor-Landscape Orientation Top Bottom 90º Landscape Orientation Angle ViewsPortrait Orientation Angle Views Dimensions are in millimeters Monitor Mounting and Orientation About Touchmonitor Adjustments OperationSEL select Power switch Rear Panel Control Buttons for On-Screen Display OSDSEL OSD Menu Functions OSD Remote Control ButtonsAUTO/SEL select Power Lock/Unlock Auto Adjust PhaseOSD Timeout Luminance BrightnessRecall Defaults Recall Recall ColorMiscellaneous Sharpness Display InformationPreset Display Modes Troubleshooting Solutions to Common ProblemsTechnical Support Touchmonitor Safety Care and Handling of Your Touchmonitor Waste Electrical and Electronic Equipment Weee Directive Technical Specifications Preset Display Modes 2240L SpeciﬁcationsDimensions HxWxD Regulatory Information Page Page FCC Imerc Warranty Page Getting in Touch with Elo