4.Insert the Windows or Windows NT driver disk into diver A or B.
5.Browse for “setup.exe” in the directory to which you extracted the driver files.
6.Type “setup.exe” in the space provided and press Enter.
7.The touchscreen setup wizard will appear.
You will need to select serial port, type of touchscreen controller, and language.
8.Complete the setup program.
9.Shutdown and restart windows NT.
10.Click the start button, then click control panel.
11.
12.Click the calibrate button and touch each of the three targets as they appear on the screen.
Contacting ELO
www.elotouch.com
ELO Touchsystems INC.
6500 Kaiser Drive Fremont,
CA 94554 USA
31