Securing the Base
There are two mounting options for the 15D1 touchcomputer. In both cases, the base must be mounted on a horizontal surface.
•Option 1: Secure from below. Use the four pretapped holes to secure the touchcomputer from below the mounting surface. The holes are designed to work with ISO metric m6 screws. These screws are not contained in the package, but should be readily available at any hardware store.
•Option 2: Secure from top. Use the two through holes to secure the base to the surface.
NOTE: Mounting screws are not provided with the shipment.
Refer to the figure below for the location of the holes. All dimensions are in millimeters.
Option 2 Through holes
Option 1 Pretapped holes
Advertising Brackets
Advertising brackets are provided to allow the user to display paper ads on the back of the 15D1 touchcomputer. These brackets are included separately in the accessory box. The maximum size of the advertising material is 220mm X 320mm (8.6” X 12.6”).
15D1 TOUCHCOMPUTER USER GUIDE | 7 |