Elo TouchSystems 15D1 LED Functionality, OSD and Power Button Control, Base Power Status LED

Feature

Description

Language	Changes language to English, French, Italian, German, Spanish,
	Japanese, Simplified Chinese, or Traditional Chinese.
Recall	Sets color recall and recall defaults. Restores original factory
	settings.
Miscellaneous	Adjusts sharpness, enables/disables DDCCI function.
	• Sharpness: Adjusts sharpness of video.
Exit	Exits the OSD.

OSD and Power Button Control

The OSD menu and power button are enabled by default.

To enable or disable the OSD function:

1.Simultaneously press Menu/Exit and the Left (<-) key for two seconds. A window appears displaying OSD ENABLE or OSD DISABLE.

2.When the OSD is disabled, the OSD menu is not visible.

To enable or disable the power button (PWR) lock function:

1.Simultaneously press Menu/Exit and the Right (->) key for two seconds. A window appears displaying PWR ENABLE or PWR DISABLE.

2.When the power button lock feature is activated, the power button is disabled.

LED Functionality

Base Power Status LED

The 15D1 base has two LEDs that indicate the power status and hard drive status. See the figure on page 9, item 1 for the location of this LED. The light can be green, flashing green, red, or off. The table below shows LED state and corresponding color.

LED Color to Observer

State

Off	No input power — Off mode
Red	Input power present, power switch off — Off mode
Flashes green	Input power present — Sleep mode
Green	Input power present — On mode

15D1 TOUCHCOMPUTER USER GUIDE 11