Elo TouchSystems 15D1 manual Fingerprint Reader FPR, Testing the FPR

Page 26

Fingerprint Reader (FPR)

The fingerprint reader is powered by the USB bus. The reader optically scans the fingerprint when the user touches the glowing window. Optical technology gives the highest quality fingerprint scans and reliability.

Fingerprint reader specifications are shown in the table below.

Feature

Specification

Fingerprint reader

DigitalPersona U.are.U 4000B

 

 

Power supply

5.0VDC +/- 0.25V

 

 

Current draw – scanning mode

190 mA (typical)

 

 

Current draw – idle mode

140 mA (typical)

 

 

Current draw – suspend mode

1.5 mA (typical)

 

 

Image resolution

512 dpi

 

 

Image color

8-bit gray level

 

 

Scan capture size

14.6mm (nominal width) x 18.1mm (nominal length)

 

 

Image capture speed

100 ms

 

 

USB type

1.0, 1.1, or 2.0

 

 

Operating temperature

0 to 40°C

 

 

Electrostatic discharge (ESD)

Up to 15kV mounted in case

 

 

Part number

E373639

 

 

Testing the FPR

1.Double-click the Fingerprint Reader Test icon to start the test application.

2.Place your finger on the fingerprint reader sensor and verify that the image of your fingerprint is displayed on the application window.

15D1 TOUCHCOMPUTER USER GUIDE 21

Image 26
Contents 15D1 Touchcomputer User Guide Elo TouchSystems 15D1 Touchcomputer User Guide Copyright 2009 Tyco Electronics. All Rights Reserved Table of Contents Technical Support Setup Unpacking Your TouchcomputerSelecting the Language Adjusting the DisplaySetting Up the Operating System Select the Regional Options tab 15D1 Touchcomputer User Guide Selecting the Time Zone Testing PeripheralsCalibrating the Touchscreen 15D1 Touchcomputer User Guide Securing the Base Advertising Brackets15D1 Touchcomputer User Guide Operation On-Screen Display OSD OSD MenuLED Functionality OSD and Power Button ControlBase Power Status LED HDD Activity LED Head Power Status LEDTouch Power Status LED Using the Input/Output Panel 15D1 Touchcomputer User Guide Number Port Description Options and Upgrades Adding Optional PeripheralsMagnetic Stripe Reader MSR Testing the MSR Testing in USB MSR Keyboard KB Emulation ModeCustomer Display Testing the Customer Display Testing the FPR Fingerprint Reader FPRBarcode Scanner Enabling 2-D Scanning Testing the Barcode Scanner Connect button Port field Wireless Card Cash Drawer Port Third-Party PeripheralsPrinter Port Additional Hard Drives Elo POS Demo SoftwareSafety and Maintenance SafetyCare and Handling Recovering the Operating System Weee DirectiveTechnical Specifications Touchcomputer SpecificationsBios AMI Feature Description Serial Ports Connector SpecificationsPrinter Power Input Pin Definition Cash Drawer Port Signal Definition Cash Drawer Port SpecificationsSerial Port Power Selection Cash Drawer Port Power SelectionDisplay Screen Specifications Displays an out of range warningEnvironmental Specifications Technical Assistance Using the TouchcomputerUsing the Web Using the Phone Electrical Safety Information II. Emissions and Immunity Information15D1 Touchcomputer User Guide III. Agency Certifications Warranty 15D1 Touchcomputer User Guide Index 15D1 Touchcomputer User Guide Getting in Touch with Elo