Elo TouchSystems ES601068 Rev A manual

Page 8

7.EloGetBatteryVoltageCurrent(BATTERY_LOCATION location, short *pVoltage, short *pCurrent);

Description: Retrieve the battery voltage and current

IN: BATTERY_LOCATION: 0 Tablet Battery 1 Docking Battery

OUT: 0 – 65536 for Voltage, -32768 – 32767 for Current

Successful Return value: STATUS_OK (0)

8.EloSetBatteryChargingStrength(BATTERY_LOCATION location, unsigned int Strength); Description: Set the battery charging strength

IN: BATTERY_LOCATION: 0 Tablet Battery 1 Docking Battery

IN: The strength percentage value to be set, 0 - 100

Successful Return value: STATUS_OK (0)

9.EloSetBatteryChargingThreshold(BATTERY_LOCATION location, unsigned char perCent); Description: Set the battery charging threshold

IN: BATTERY_LOCATION: 0 Tablet Battery 1 Docking Battery

IN: The charging threshold percentage value to be set, 0 - 100

Successful Return value: STATUS_OK (0)

10.EloSetBatteryLifeTime(BATTERY_LOCATION location, unsigned int LifeTime); Description: Set the battery charging threshold

IN: BATTERY_LOCATION: 0 Tablet Battery 1 Docking Battery

IN: The charging threshold value to be set

Successful Return value: STATUS_OK (0)

Elo® Tablet NFC Reader Application Note

ES601068 Rev A, Page 8 of 23

Image 8
Contents Elo Tablet Change History Copyright 2013 Elo Touch Solutions, Inc. All Rights Reserved Table of Contents Introduction Battery Management Application Programming InterfacePage Page MCU POS Peripheral Sensors Bit 2 of pData is Freefall value Page Page Page Page Page Eeprom Page Page Page Page Getting in Touch with us Check out Our Website