3. Web Control
3.1 Projector Web Control - Schedule Settings (continued)
NOTE • After the projector is moved, check the date and time set for the projector before configuring the schedules.
•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.
•Events “My Image” and “Messenger” will not be executed appropriately but result in “schedule execution error” status in case lamp does not light or/and display data are not stored in the projector at the scheduled event execution time.
•Events “Input Source” and “My Image” will not be executed if security feature is enabled and the projector is locked due to the feature.
•Certain error state in the projector (such as temperature error, lamp error) will prevent the projector from appropriate execution of scheduled functions/events.
•If no USB memory device is inserted to the projector or no image data for display exists at the scheduled event time, a schedule execution error occurs against the scheduled Slideshow event.
•When you start the Slideshow, input source will be automatically switched to the USB TYPE A port.
•Image files stored in the root directory of the USB memory device will be displayed for the scheduled Slideshow.
•Please refer to Troubleshooting in the Operating Guide in case scheduled functions/events are not executed appropriately as you've set.
29