Crestron electronic CP-WX8240, CP-X8150 user manual Enables Dhcp, Disables Dhcp, Web Control

Page 21

3. Web Control

3.1 Projector Web Control - Network Settings (continued)

			Item	Description

Wired Setup				Configures the wired LAN settings.
	IP Configuration			Configures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Configures the IP address when DHCP is disabled.
			Subnet Mask	Configures the subnet mask when DHCP is disabled.
			Default	Configures the default gateway when DHCP is disabled.
			Gateway	Configures the default gateway when DHCP is disabled.
			Gateway
	DNS Server Address			Configures the DNS server address.
Other Setup				Configures other network settings.
				Set whether to or not to use Crestron e-Control®.
	Crestron e-Control			If you choose Disable, the Logon window of Projector Web
	Crestron e-Control			Control and not the selection window will be displayed at first

				of the Web Control.

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection from

Network Restart on the main menu (&41).

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•The WEP Key, WPA passphrase and SSID settings will not be set if the invalid characters are used.

•The projector does not allow both wireless and wired LAN to be connected to the same network. Do not set the same network address for both wireless and wired LAN.

21

Image 21

Contents Features Thank you for purchasing this productTrademark acknowledgment Manual network connection setting Wireless LAN ContentsConnection to the network Network Presentation Web ControlOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkRequired equipment preparation Hardware and software requirement for computerSystem requirements Quick connectionThis section explains how to set it up manually Manual network connection setting Wired LANNetwork settings Equipments connectionManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANManual network connection setting Wireless LAN Wireless LAN connection set upWireless About IP address Manual network connection setting Wireless LAN Network Presentation Web Control User name Password Administrator Blank Projector Web ControlLogon Network Information Projector Web ControlLAN DhcpAMX D.D Displays and configures network settingsProjector Web Control Network Settings Dhcp onDhcp OFF Enables Dhcp Disables DhcpWeb Control Displays and configures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsMail Settings Displays and configures e-mail addressing settingsSend Test Mail Displays and configures failure & alert settings Alert SettingsOnly Lamp Time Alarm and Filter Time Alarm Alarm TimeExcept Cold Start and Authentication Failure Snmp TrapDisplays and configures schedule settings Schedule SettingsDescription Schedule Date Month/DayMessenger Projector Web Control Schedule Settings Date/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Time difference Projector Web Control Date/Time SettingsSntp Sntp Server AddressSnmp Security SettingsProjector Control Projector Web Control Projector Control Auto ECO Mode Setup Auto KeystoneECO Mode InstallationSpeaker Audio VolumeAudio Source Audio Source LANAuto Power OFF Direct Power onShade Timer Option Source SkipRemote Receiv ServiceFront RearRemote Control Projector Web Control Remote Control Projector Status Displays the settings and status of the projectorNetwork Restart Restarts the projector’s network connectionCrestron e-Control Clicking the corresponding tab at the top rightWindow Crestron e-Control Main windowSources List Crestron e-Control- Main window Tools window Crestron ControlProjector User Password Projector Configures the network settings of the projectorAdmin Password Crestron e-Control- Tools windowProjector Information Info windowHelp Desk window Emergency Alert OPTION menu in the Operating Guide My Image FunctionMessenger Function Network Bridge Function Connecting devicesOperating Guide Technical LAN port USB Type a port Control portCommunication port Communication setupControl port ConditionHALF-DUPLEX Transmission methodFULL-DUPLEX Transmission methodMail Settings &24 Other FunctionsMail Alerts Mail Alerts Snmp Settings &23 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings &27Date/Time Settings &30 Command Control via the Network Following two ports are assigned for the command controlCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232Ccommand Check Sum Connection TCP #9715Reply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpecifications Warranty and after-sales service