Configuring volume control settings

AccuMic Microphone — AccuMic PC

To ensure audio is heard clearly on both ends, you must configure the Volume Control settings on your computer. You need to mute the near-end microphone balance to prevent local audio feedback. (Note:This does not mute the AccuMic Microphone). You also need to select and adjust the far-end microphone balance to ensure audio is being sent at a proper level and far-end participants can hear you.

To open the volume control panel

1.From the Start Menu, go to Settings, then Control Panel.

2.Double click the Sounds and Multimedia icon to open Sounds and Multimedia Properties.

3.Select the Audio tab and click Volume in the Sound Playback section.

Figure 8. Sounds and multimedia properties

The Volume Control panel will open.

Figure 9. Volume control

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760