2. Installation and Connections
❷Making Connections
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
*If the screen goes blank while using your remote control, it may be the result of the computer's
Enabling the computer’s external display
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For more details, refer to your computer’s owner’s manual.
Connecting Your PC or Macintosh Computer
NOTE: The ANALOG IN- 1 connector supports Plug & Play (DDC2).
DIGITAL IN/ | AUDIO IN | |
| ||
ANALOG | ANALOG | |
|
| AUDIO IN ANALOG |
L |
| |
IN |
| DIGI L IN / |
| SERVICE PORT | |
VIDEO | R |
IN |
|
| AUDIO IN |
Use the optional DVI digital cable
DVI digital cable (Optional:
PHONE 
Audio cable (not supplied)
IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)
VGA cable (supplied)
To mini
NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port.
PHONE
IBM VGA or Compatibles (Notebook
type) or Macintosh (Notebook type)
NOTE: Use an audio cable without a
NOTE: An image may not be displayed correctly when a Video or
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
*When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet.
15