Dukane 28A8910 user manual Input Menu, Automatic Adjustment at RGB Input Select the Execute with

OPERATIONS (continued)

Input Menu

The following functions are available when INPUT is selected on the

menu. Select an item with the and buttons, and start or stop

operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode.

Table 5. Input Menu

SETUP	INPUT	IMAGE	OPT.	ENGLISH
AUTO		EXECUTE
RGB		CANCEL
VIDEO
HDTV

Item	Description
	Automatic Adjustment at RGB Input: Select the EXECUTE with the
	button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock
	phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
	Use with the window at maximum size in the application display.
AUTO	Automatic Adjustment at Video Input: Select the EXECUTE with the
	button. A signal type appropriate for the input signal is selected
	automatically when EXECUTE is selected automatically. Valid only when
	AUTO is set for VIDEO on the menu.
	• This operation requires approximately 10 seconds. It may not function correctly with
	some input signals. Pressing the AUTO button in this case may correct this problem.
	• This function is the same as for the AUTO function in Basic operation.
RGB	Displays RGB Input Frequency: Displays the horizontal and vertical sync
	signal frequencies for RGB input.
	• Valid only at RGB input.

Select Video Signal Type: Select the signal type with the and buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the input signal. The selection of AUTO enables and executes the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.

•Use this function when the image becomes unstable (eg. the image becomes VIDEO (**) irregular, or lacks color) at VIDEO/S-VIDEO input.

•Automatic Adjustment requires approximately 10 seconds. It may not function correctly with some input signals. Pressing the AUTO button in this case may correct this problem except for the N-PAL input.

•For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the signal of HDTV.

HDTV

Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the input signal with the / button.

ENGLISH-13